Evaluation of condylar and mandibular movements on the upper airway during the use of mandibular advancement device for obstructive sleep apnea treatment.

OBJECTIVES: To evaluate the temporomandibular joint (TMJ), condylar and mandibular movements in obstructive sleep apnea (OSA) patients treated with mandibular advancement device (MAD) and to identify the influence of these anatomic factors on upper airway (UA) volume and polysomnographic outcomes after treatment. MATERIALS AND METHODS: Twenty OSA patients were prospectively treated with MAD. Clinical examinations, cone-beam computed tomography, and polysomnography were performed before MAD treatment and after achieving therapeutic protrusion. Polysomnographic variables and three-dimensional measurements of the TMJ, mandible, and upper airway were statistically analyzed. RESULTS: Condylar rotation, anterior translation, and anterior mandibular displacement were directly correlated with total UA volume, while vertical mandibular translation was inversely correlated with the volume of the inferior oropharynx. MAD treatment resulted in an increase in the volume and area of the superior oropharynx. There was no statistically significant correlation between condylar rotation and translation and polysomnographic variables. With MAD, there was a significant increase in vertical dimension, changes in condylar position (rotation and translation), and mandibular displacement. The central and medial lengths of the articular eminence were inversely correlated with condylar rotation and translation, respectively. The lateral length of the eminence was directly correlated with condylar translation, and the lateral height was directly correlated with condylar rotation and translation. CONCLUSION: Condylar and mandibular movements influenced UA volume. The articular eminence played a role in the amount of condylar rotation and translation. CLINICAL RELEVANCE: Individualized anatomical evaluation of the TMJ proves to be important in the therapy of OSA with MAD.

Genetic Polymorphisms of Estrogen Receptors α and ß are Associated with Craniofacial Measurements in Patients With Dentofacial Deformity.

Dentofacial deformities are characterized by abnormalities in craniofacial development that affects the individual's skeletal and occlusion, often causing functional and esthetic problems. In literature, there is an involvement of polymorphisms in estrogen receptor 1 (ESR1) and estrogen receptor 2 (ESR2) genes in craniofacial measurements. The aim of this study was to evaluate a possible association between polymorphisms in ESR1 (rs2234693 and rs9340799) and ESR2 (rs1256049 and rs4986938) genes with cephalometric measurements in individuals with dentofacial deformities. This cross-sectional study was performed with 158 individuals in the preoperative period of orthognathic surgery. The cephalometric measurements obtained through lateral cephalogram using Dolphin Imaging software. For genetic analysis, the DNA extracted from epithelial cells of the oral mucosa and were genotyped using the real-time polymerase chain reaction. The data found submitted to statistical analysis, through the Kolmogorov-Smirnov, Mann-Whitney, and Kruskal-Wallis tests, using the IBM SPSS software version 24.0. Considered a significance level of 0.05. We found association between polymorphisms and cephalometric measurements just in the female sex. The polymorphisms ESR1/rs9340799 ( P= 0.003), ESR1/rs2234693 ( P= 0.026), and ESR2/rs1256049 ( P= 0.046) were associated with the upper gonial angle (Ar-Go-N). The polymorphism ESR2/rs1256049 was also associated with the facial axis-rickets (NBa-PtGn) ( P= 0.004), anterior cranial base (SN) ( P= 0.036), and Y-axis (SGn-SN) ( P= 0.031).

Utilização do PowerScope para potencializar o tratamento da Classe II com Invisalign / Use of PowerScope to enhance Class II treatment with Invisalign

Resumo Corrigir a relação molar de Classe II em um paciente adulto não é uma tarefa fácil. E com os alinhadores ortodônticos isso torna-se ainda mais difícil. Os alinhadores têm dificuldade na sua correção, principalmente porque sua eficácia depende do uso de elásticos e, muitas vezes, os pacientes não colaboram o suficiente. Há casos em que o paciente deveria ser tratado com cirurgia ortognática, mas o paciente não aceita ser submetido a ela. Então, podemos tratá-lo de forma compensatória utilizando um propulsor mandibular, como o PowerScope. Este artigo descreve três maneiras de incorporar o PowerScope no tratamento da Classe II com o Invisalign. São descritos os desenhos híbrido, simplificado e complexo, cada um ilustrado por um caso clínico. Desta forma, pode-se concluir que o PowerScope pode ser um grande aliado no tratamento de casos complexos de Classe II junto aos alinhadores Invisalign. A abordagem é muito promissora, mas ainda necessita de alguns ajustes (AU)

Abstract Correcting a Class II molar relationship in an adult patient is not an easy task. And with orthodontic aligners this becomes even more difficult. Aligners have difficulties in Class II correction, mainly because their effectiveness depends on the use of elastics, and patients often do not cooperate enough. There are cases in which patients should be treated with orthognathic surgery, but they do not accept the surgery. So, we can treat them compensatory using a Class II corrector, like the PowerScope. This article describes three ways to incorporate PowerScope into Class II treatment with Invisalign. The designs are described as hybrid, simplified, complex and each one is illustrated by a clinical case. In this way, it can be concluded that PowerScope can be a great ally in the treatment of complex Class II cases with Invisalign aligners. The approach is very promising, but still needs some adjustments (AU)

Utilização do Sistema Invisalign no tratamento ortodôntico-cirúrgico de paciente Classe III ­ relato de caso / The use of Invisalign System in the orthodontic-surgical treatment of a class III patient ­ case report

Resumo A correção da má oclusão de Classe III em paciente adulto é considerada um dos problemas mais desafiadores em relação ao tratamento. Em um caso com grande discrepância esquelética, a combinação de Ortodontia e Cirurgia Ortognática é o tratamento de escolha. O objetivo deste trabalho foi relatar o tratamento ortodôntico-cirúrgico de uma paciente de 27 anos com má oclusão de Classe III. Clinicamente, a maxila estava retruída e a mandíbula protruída. Apresentava mordida cruzada posterior bilateral e relação de topo na região anterior. A linha média superior era coincidente com a linha média facial e a linha média inferior exibia um desvio de 1,5 mm. A paciente optou por um aparelho ortodôntico mais estético. O plano de tratamento incluiu planejamento ortodôntico e cirurgia ortognática combinados para a correção da Classe III, estabelecimento de relações molar e canino de Classe I, correção dos trepasses horizontal e vertical, ajuste das linhas médias e melhora da estética facial e dentária. O tratamento ortodôntico empregou alinhadores removíveis Invisalign para o preparo pré-cirúrgico e finalização pós-operatória. Foi realizada cirurgia combinada de avanço maxilar e recuo mandibular. A utilização do sistema Invisalign combinado com a cirurgia ortognática foi eficiente para correção das deformidades dentofaciais e restabelecimento de uma oclusão satisfatória. (AU)

Abstract Correction of Class III malocclusion in an adult patient is considered one of the most challenging problems regarding treatment. In a case with a large skeletal discrepancy, a combination of orthodontic and orthognathic surgery is the treatment of choice. The aim of this study was to report the ortho-surgical treatment of a 27-year-old female patient with Class III malocclusion. Clinically, the maxilla was retruded and the mandible protruded. She had a bilateral posterior crossbite and an edge-to-edge incisor occlusion. The upper midline was coincident with the facial midline and the lower midline had a deviation of 1.5 mm. The patient opted for a more aesthetic orthodontic appliance. The treatment plan included combined orthodontic planning and orthognathic surgery to correct Class III, establish Class I molar and canine relationships, correct overjet and overbite, adjust midlines, and improve facial and dental esthetics. Orthodontic treatment consisted of removable Invisalign aligners for preoperative preparation and completion postoperative. A combined maxillary advancement and mandibular setback surgery was performed. The use of the Invisalign system combined with orthognathic surgery was efficient in correcting dentofacial deformities and restoring satisfactory occlusion (AU)

Estudo comparativo com microscópio a laser confocal da superfície do esmalte após a aplicação de diferentes técnicas de remoção do material de adesão dos bráquetes / Comparative study with confocal laser microscopy of the enamel surface after the application of different techniques for removing the adhesion material from the brackets

Resumo O objetivo desta pesquisa foi avaliar e quantificar a rugosidade do esmalte dentário após a remoção do adesivo residual ao retirar os bráquetes. Em 30 pré-molares humanos clinicamente saudáveis, foi realizada a colagem de bráquetes no centro da face vestibular. Após 24 horas, foram descolados e foi realizado o polimento do adesivo residual com três métodos diferentes: fresa multilaminada (12 lâminas) tronco-cônico com instrumentos rotativos em alta velocidade irrigada com água; fresa redonda com instrumentos rotativos em baixa velocidade (contra ângulo) sem irrigação e fresa de fibra de vidro com instrumentos rotativos em baixa velocidade (contra-ângulo) sem irrigação. Os elementos dentários foram observados com microscópio laser confocal antes da colagem dos bráquetes. Após a sua retirada e remoção do adesivo residual, a superfície do esmalte foi observada novamente com o microscópio laser confocal, e foi utilizado o software digital OLYMPUS OLS-4100 para realizar uma reconstrução tridimensional e medir a rugosidade deixada pelos diferentes métodos de polimento. Os resultados indicaram que a fresa multilaminada em alta velocidade irrigada com água é a que deixa a superfície com parâmetros de rugosidade mais baixos. Portanto, a fresa multilaminada seria o método mais indicado para eliminar a resina residual após a retirada dos bráquetes ao final de um tratamento ortodôntico (AU)

Abstract The aim of this research was to evaluate and quantify the roughness of the dental enamel after removing the residual adhesive when removing the brackets. In 30 clinically healthy human premolars, brackets were bonded in the center of the buccal face, which were detached in 24 hours, and the residual adhesive was polished with three different methods: multi-laminated bur (12 blades) conical trunk with rotary instruments in high speed irrigated with water, round milling cutter with low-speed rotary instruments (contra-angle) without irrigation, and glass milling (Fiber Glass) with low-speed rotary instruments (contra-angle) without irrigation. The dental elements were observed with a confocal laser microscope before bracket bonding. After its removal and removal of the residual adhesive, the enamel surface was observed again with the confocal laser microscope, and the OLYMPUS OLS-4100 digital software was used to perform a three-dimensional reconstruction and measure the roughness left by the different polishing methods. The results indicated that the multi-laminated cutter at high speed, irrigated with water, is the one that leaves the surface with lower roughness parameters. Therefore, the multilaminated bur would be the most suitable method to eliminate residual resin after removing brackets at the end of an orthodontic treatment. (AU)

Long-term stability of Class II malocclusion treatment with the cantilever bite jumper.

INTRODUCTION: This study aimed to assess the long-term stability of Class II malocclusion treatment with the Cantilever Bite Jumper (CBJ) after 13 years of follow-up. METHODS: The treatment group comprised 10 Class II Division 1 malocclusion patients treated with the CBJ, followed by fixed appliances, analyzed at 3 stages: pretreatment (aged 11.56-14.32 years), posttreatment (aged 16.34-19.58 years), and long-term posttreatment (aged 29.04-32.33 years). The control group included 15 subjects with normal occlusion. Intragroup treatment changes comparison was performed with repeated measures and analysis of variance followed by Tukey tests. Intergroup comparisons regarding the long-term posttreatment changes were performed with t tests. RESULTS: No statistically significant relapse was observed during the follow-up period. Morever, the treated group presented a significantly smaller increase in lower anterior facial height and greater retrusion of the lower lip than the control group in the posttreatment period. CONCLUSIONS: Treatment with the CBJ, followed by fixed appliances, is a stable alternative for Class II Division 1 malocclusion correction. The dentoskeletal and soft-tissue changes obtained during treatment remained stable in the long-term posttreatment follow-up.

Stability of fiducial cephalometric landmarks of growing Class II malocclusion patients: a three-dimensional retrospective study.

OBJECTIVES: To evaluate three-dimensionally (3D) the stability of Nasion (Na), Sella (S), Basion (Ba), Porion (Po), and Orbitale (Or) in different age groups of growing Class II malocclusion patients and, additionally, to assess rotational changes of the S-Na and Ba-Na lines and the Frankfurt Horizontal Plane (FHP). MATERIALS AND METHODS: Cone-beam computed tomography studies of 67 Class II division 1 malocclusion patients, acquired at baseline (T0) and 1 year later (T1), were retrospectively assessed. Anterior cranial fossa was used for volumetric superimposition. Subjects were grouped according to their age at T0: group 1 (G1) (8-10 years), G2 (11-13 years), and G3 (14-17 years). Quantitative assessments of the 3D linear displacements (Euclidean distance) in the position of Na, S, Ba, Po, and Or were performed. Displacement in the X, Y, and Z projections and the rotation of S-Na, Na-Ba, and FHP were also quantified. RESULTS: All cephalometric landmarks showed 3D displacement (P = .001) in the three age groups. Orbitale remained stable in the vertical and sagittal dimension from 8 to 17 years (P > .05). S-Na, Na-Ba, and the FHP showed statistically significant angular rotation (P < .05) in younger patients (G1), while in older individuals (G2 and G3) they were stable (P > .05). CONCLUSIONS: Na, S, Ba, and Po showed vertical and sagittal positional changes relative to the anterior cranial fossa during the growth of Class II individuals. After age 11, S-Na, Na-Ba, and FHP did not show rotation and, thus, are valid parameters for angular cephalometric analysis in Class II growing patients.

Three-dimensional skeletal and dentoalveolar sagittal and vertical changes associated with cantilever Herbst appliance in prepubertal patients with Class II malocclusion.

INTRODUCTION: This study aimed to assess sagittal and vertical skeletal and dentoalveolar changes through the use of 3-dimensional imaging in prepubertal Class II malocclusion patients treated with a cantilever Herbst appliance (HA). Condyle-glenoid fossa positional changes were also quantified. METHODS: This retrospective cohort study assessed 22 children (11.2 years ± 1.2) consecutively treated with a cantilever HA for 12 months and 11 untreated children (aged 9.3 ± 0.30 years) that served as controls. Cone-beam computed tomography was performed at baseline (T1) and at the end of the observation period (T2). Movements in the regions of interest were measured as linear displacements from cone-beam computed tomography images through algebraic calculations. A Student t test for independent samples was used for group equivalence testing at T1, and the treatment differences between T2 and T1 were evaluated by 2 analyses of covariance, one considering the expected growth unit as a covariate and the other with an annualized factor. RESULTS: The largest dental movement was a mesial movement of mandibular molars (3.70 mm), whereas the largest skeletal changes consisted of a larger relative length of the mandible (difference of 1.2 mm) in the HA group than in the control group. CONCLUSIONS: Within the study limitations (retrospective cohort, historical control group, and sample size), 3-dimensional imaging suggests that HA corrected Class II malocclusion in a predominantly prepubertal sample through more dental than skeletal changes. The changes were more significant in the sagittal than in the vertical direction. In addition, relative stability in the condyle-fossa relationship was noted.

Treatment of Class II malocclusion with a customized lingual appliance combined with a Class II corrector.

Correcting a complete Class II malocclusion in an adult patient can be quite difficult. If the patient has a large skeletal discrepancy, orthognathic surgery is the treatment of choice. However, if the discrepancy is small or if the situation is borderline and the mandibular incisors are retroclined, Class II correctors can be used. This clinical report presents the orthodontic treatment of a 24-year-old woman with Class II malocclusion. Clinically, her maxilla was slightly protruded, and the mandible was well-positioned. She had uprighted maxillary and mandibular anterior teeth and a deepbite, and she opted for a more esthetically appealing orthodontic appliance. The treatment plan included leveling and alignment of the teeth in both arches, Class II correction, establishing Class I molar and canine relationships, correction of overbite and overjet, adjustment of midlines, and improvement of facial and dental esthetics. Orthodontic treatment consisted of customized lingual appliances combined with a Class II fixed corrector.

Assessing the association between vitamin D receptor and dental age variability.

OBJECTIVES: To explore the association between genetic polymorphisms in vitamin D receptor (VDR), vitamin D serum levels, and variability in dental age. MATERIAL AND METHODS: This cross-sectional study was based on an oral examination, panoramic radiograph analysis, and genotype analysis from biological samples. Dental age was evaluated using two different methods: Demirjian et al. (Hum Biol 45:211-227, 1973) and Hofmann et al. (J Orofac Orthop.78:97-111, 2017). The genetic polymorphisms BglI (rs739837) and FokI (rs2228570) in VDR were genotyped through real-time PCR. The vitamin D level was also measured in the serum. Delta (dental age-chronological age) was compared among genotypes in VDR in the co-dominant model. Multiple linear regression analysis was also performed. An established alpha of 5% was used. RESULTS: Genotype distributions of BglI and FokI were not associated with dental maturity (p > 0.05). In the logistic regression analyses, genotypes in BglI and FokI and vitamin D levels were not associated with variability in dental age (p > 0.05). CONCLUSIONS: The genetic polymorphisms BglI and FokI in VDR and the vitamin D levels were not associated with variability in dental age. CLINICAL RELEVANCE: To unravel the factors involved in dental maturity can improve dental treatment planning in pediatric and orthodontic practice.

Interceptação da mordida aberta anterior na dentição mista ­ relato de caso / Anterior open bite interception in mixed dentition ­ case report

Resumo A mordida aberta anterior (MAA) merece destaque ímpar, já que além de ser a mais frequente entre as discrepâncias verticais e comprometer a estética dental, interfere também na função mastigatória e na fala do paciente, afetando consequentemente a sua auto-estima. Por seu caráter multifatorial, essa má oclusão pode ser causada por diversas razões, tais como a herança genética ou desenvolvimento maxilofacial inerente a cada individuo. O presente trabalho teve como objetivo descrever o tratamento de um paciente com MAA. O paciente BS de 7 anos e 5 meses de idade possuía má oclusão de Classe I com mordida aberta anterior (-2,8 mm). O plano de tratamento foi dividido em duas fases: na primeira, foi utilizado o aparelho de Haas com grade lingual na arcada superior; na arcada inferior, utilizou-se um expansor removível. Na sequência do tratamento, instalou-se o aparelho fixo em ambas as arcadas. O tratamento teve duração de 9 (nove) meses e conseguiu o fechamento da mordida aberta anterior. A segunda fase iniciou-se após a irrupção dos segundos molares permanentes e teve duração de 13 meses. Como conclusão se observou que o tratamento da mordida aberta anterior em duas fases foi uma excelente escolha para o tratamento do paciente aqui relatado. Na primeira fase, a mordida foi fechada e as arcadas foram alargadas para permitir o posicionamento adequado de todos os dentes permanentes, que tiveram seu posicionamento perfeitamente detalhado na segunda fase.(AU)

Abstract The anterior open bite (AOB) deserves unique attention as in addition to being the most frequent among vertical discrepancies and compromising dental aesthetics, it interferes in the patient chewing function and speech, consequently affecting their self-esteem. Due to its multifactorial character, this malocclusion can be caused by several reasons, such as genetic inheritance or maxillofacial development inherent to each individual. This study aimed to describe the treatment of a patient with AOB. Patient BS 7-year and 5-month-old had a Class I malocclusion with anterior open bite (-2.8 mm). The treatment plan was divided into two phases: In the first, the Haas appliance with fixed palatine crib in the upper arch was used; in the lower arch, a removable expander was used. Following the treatment, the fixed appliance was installed in both arches. The treatment lasted 9 months and achieved AOB closure. The second phase started after the eruption of the second permanent molars and lasted 13 months. In conclusion, it was observed that the treatment of AOB in two phases was an excellent choice for the patient treatment reported here. In the first phase, the bite was closed, and the arches were widened to allow the proper positioning of all the permanent teeth, which had their positioning perfectly detailed in the second phase.(AU)

Avaliação do padrão craniofacial de indivíduos do nordeste brasileiro portadores de apneia obstrutiva do sono ­ estudo cefalométrico / Assessment of craniofacial pattern from northeast Brazil individuals with obstructive sleep apnea ­ cephalometric study

Resumo A identificação de padrões craniofaciais associados à Apneia Obstrutiva do Sono (AOS) continua a despertar interesse na medida em que os predisponentes anatômicos podem divergir entre grupos populacionais. O objetivo do estudo foi identificar o padrão craniofacial e as principais características cefalométricas de indivíduos brasileiros com AOS nascidos no estado do Ceará ­ Nordeste do Brasil. Materiais e Métodos: Foram triados 50 voluntários cearenses com diagnóstico polissonográfico de AOS, os quais se submeteram à avaliação clínica, polissonográfica e cefalométrica. O grupo controle foi composto por 25 indivíduos cearenses adultos com oclusão dentária normal, sem relatos de sinais e/ou sintomas relacionados à AOS. Resultados: O grupo com AOS apresentou alterações nas estruturas anatômicas esqueletais, principalmente, um posicionamento inferior do osso hioide (p=0.001) e retrusão mandibular (p=0.012). Alterações também foram observadas nas dimensões dos tecidos moles faríngeos, principalmente, aumento no comprimento (p=0.001) e largura do palato mole (p=0.001), com diminuição do espaço aéreo póstero-superior (p=0.001). Apenas as variáveis cefalométricas SNA (posição anteroposterior da maxila) ­ (p=0.739) e EAP (espaço aéreo faríngeo inferior) ­ (p=0.268) não apresentaram diferenças entre os grupos. Conclusão: Grandezas cefalométricas representativas do posicionamento de estruturas esqueléticas e das dimensões de tecidos moles faríngeos se mostraram significativamente diferentes, quando um grupo de indivíduos com AOS foi comparado à indivíduos de um grupo controle. (AU)

Abstract The identification of craniofacial patterns associated to the Obstructive Sleep Apnea (OSA) continues to arise interest, especially since anatomical predisposing factors differ from group to group. The aim of this study was to identify the craniofacial patterns and cephalometric characteristics in Brazilian individuals with OSA born in Ceará ­ Northeast Brazil. Materials and Methods: fifty OSA volunteers diagnosed with a polysomnography were selected. The control group consisted of 25 adults from Ceará with normal dental occlusion and without reports of OSA signs or symptoms. All participants were submitted to clinical, polysomnographic, and cephalometric evaluation. Results: Individuals diagnosed with OSA showed alterations in skeletal anatomical structure, mainly a lower positioning of hyoid bone (p=0.001) and mandibular retrusion (p=0.012). Alterations have also been observed in the pharyngeal soft tissue dimensions, mainly an increase in soft palate length (p=0.001) and width (p=0.001) causing a reduction in posterosuperior airway (p=0.001). Only the cephalometric variables SNA (anteroposterior position of the maxilla) ­ (p=0.739) and EAP (inferior pharyngeal airspace) ­ (p=0.268) did not present differences between the groups. Conclusion: Cephalometric measurements representative of the positioning of skeletal structures and the dimensions of pharyngeal soft tissues were significantly different when a group of subjects with OSA was compared to subjects of a control group.(AU)

Avaliação tomográfica da via aérea orofaríngea após tratamento ortocirúrgico em paciente padrão II ­ relato de caso / Tomographic assessment of the oropharyngeal airway after orthosurgical treatment in class II patient ­ case report

Resumo O avanço cirúrgico maxilomandibular é uma alternativa de tratamento eficaz em pacientes com desarmonias esqueléticas anteroposteriores e essa abordagem terapêutica tem repercussões sobre a via aérea superior em indivíduos com padrão esquelético de Classe II. O presente estudo tem como objetivo relatar o tratamento ortodôntico-cirúrgico de um paciente com má oclusão esquelética de Classe II e avaliar as mudanças volumétricas da via aérea superior através de Tomografia Computadorizada de Feixe Cônico (TCFC). Métodos: Realizou-se o tratamento ortodôntico pré-cirúrgico e tratamento cirúrgico para avanço maxilo-mandibular, impacção da maxila e mentoplastia. Obtiveram-se imagens tridimensionais por TCFC nos períodos pré-operatório e pós-operatório (3 meses) da cirurgia. Resultados: Mudanças significativas em medidas de área e volume da orofaringe no pós-operatório foram identificadas. Observou-se um aumento de 56% no volume da via aérea superior e de 150% na área de mínima secção transversal. Conclusão: O presente estudo evidenciou ganhos dimensionais importantes na via aérea superior após o procedimento ortodôntico-cirúrgico instituído para o caso (AUU)

Abstract The maxillomandibular surgical advancement is an effective treatment alternative in patients with anteroposterior skeletal disharmonies and this therapeutic approach has repercussions on the upper airway of individuals with a Class II skeletal pattern. The present study aims to report the orthodontic-surgical treatment of a patient with Class II skeletal malocclusion and to evaluate the volumetric changes of the upper airway using Cone Beam Computed Tomography (CBCT). Methods: Pre-surgical orthodontic treatment and surgical treatment for maxillomandibular advancement, maxillary impaction, and mentoplasty were performed. Three-dimensional CBCT images were obtained preoperatively and postoperatively (3 months) after surgery. Results: Significant changes in postoperative oropharyngeal area and volume measurements were identified. An increase of 56% in the volume of the upper airway and of 150% in the minimum cross-sectional area was observed. Conclusion: The present study showed important dimensional gains in the upper airway after the orthodontic-surgical procedure set up for the case (AU)

A retrospective study of the influence of obesity on polysomnography and cephalometric parameters in males with obstructive sleep apnea.

OBJECTIVE: Evaluate the influence of obesity on the polysomnographic and cephalometric parameters in obstructive sleep apnea (OSA). METHODS: Fifty records of male patients with OSA, containing information on dental, medical, polysomnographic, and cephalometric exams were selected. The degree of obesity was based on Body Mass Index (BMI). Group I comprised normal or overweight individuals (BMI ≤ 29.9 kg/m2), whereas Group II consisted of obese individuals (BMI ≥ 29.9 kg/m2). RESULTS: BMI significantly correlated with apnea and hypopnea index (p < 0.0005), minimal oxyhemoglobin saturation (p < 0.0005), and two cephalometric variables (soft palate length, p = 0.01 and width, p = 0.01). Group II showed a significant correlation with the position of the hyoid bone (p = 0.02). Soft palate length and width significantly differed between groups (p = 0.014; 0.016). CONCLUSION: Obese males present wider and longer soft palate dimensions, and patients with a greater BMI present a more inferiorly positioned hyoid bone.

Correlation between Insulin-Like Growth Factor I and Skeletal Maturity Indicators.

Objective: The purpose of this study was to evaluate the correlation between the growth maturity indicators in orthodontic patients. Design: This cross-sectional study was performed on 37 orthodontic patients (17 males and 20 females). An anamnesis, clinical and image examination, and blood sample collection were performed. The inclusion criteria were non-syndromic Class II patients of both gender, age ranging between 10 to 16 years. The lateral cephalometric radiographs were evaluated using 6-stage cervical vertebrae maturation (CVM) technique. The hand-wrist radiographs were staged using the 11-stage skeletal maturation indicator (SMI) technique. Blood was collected in the same week of the images to quantify IGF-1 levels in serum. Data were tested for normality by Shapiro-Wilk test. The Pearson test was used to determine the correlation strength between the variables (alpha of 5%). Results: A strong correlation was observed only between SMI stages and CVM stages in the total sample (r=0.864; p<0.0001) and according to the gender (r=0.793; p<0.0001 for females; and r=0.753; p<0.0001 for males). IGF-1 was only moderately correlated with SMI stages and CVM stages. Conclusion: Hand-wrist and cervical vertebral stages were strongly correlated among them, however, IGF-1 was only moderately correlated with both skeletal maturity indicators.

Distalização dos dentes inferiores para o tratamento da má oclusão de Classe III com o auxílio de dispositivos de ancoragem temporária ­ relato de caso / Distalization of lower teeth for the treatment of Class III malocclusion with the aid of temporary anchorage devices ­ case report

Resumo Este artigo descreve o tratamento ortodôntico de uma paciente jovem de 20 anos com má oclusão de Classe III. O plano de tratamento consistia em distalizar ambos os quadrantes posteriores inferiores para corrigir a má oclusão de Classe III. Além disso os objetivos do tratamento também incluíam a correção da mordida cruzada posterior e do apinhamento ântero- -inferior. Dois mini-implantes foram posicionados entre os segundos pré-molares e primeiros molares inferiores com o intuito de serem utilizados como ancoragem indireta. Molas espirais abertas foram utilizadas para a distalização, além do auxílio de elásticos de Classe III. O período total de tratamento foi de 24 meses. Ao final do tratamento, uma excelente oclusão foi obtida na paciente, juntamente com uma melhora no seu perfil facial. (AU)

Abstract This article describes the orthodontic treatment of a 20-year-old female patient with Class III malocclusion. The treatment plan consisted of distalizing both lower posterior quadrants to correct Class III malocclusion. In addition, treatment goals also included correction of posterior crossbite and anteroinferior crowding. Two mini-implants were placed between the second premolars and mandibular first molars in order to be used as indirect anchorage. Open spiral springs were used for distalization, in addition to the aid of Class III elastics. The total treatment period was 24 months. At the end of the treatment, an excellent occlusion was achieved in the patient along with an improvement in her facial profile (AU)

Correlação entre maturidade dentária e índice de massa corporal em pacientes com má oclusão de Classe II / Correlation between dental maturity and body mass index in Angle Class II patients

Resumo Objetivo: Avaliar a correlação entre o Índice de Massa Corporal (IMC) e o desenvolvimento dentário em pacientes portadores de má oclusão de Classe II. Materiais e Métodos: Tratou-se de um estudo retrospectivo com uma amostra de 37 pacientes portadores de má oclusão de Classe II, que estavam em tratamento ortodôntico. Os dados idade, gênero, peso e altura foram coletados dos prontuários, juntamente com a tomada tomográfica inicial. O desenvolvimento dentário foi avaliado pelo método de Demirjian et al. (1973). O coeficiente de correlação de Pearson foi utilizado para determinar a força de correlação entre as variáveis. A significância estatística considerada foi p <0,05 bicaudal. Resultados: A amostra foi constituída por pacientes entre 10 e 16 anos. A maioria dos pacientes (78,4%) apresentou IMC dentro da normalidade. Observou-se correlação fraca sem significância estatística entre o desenvolvimento dentário e o IMC nos pacientes avaliados (r=-0,10; p=0,55). Conclusão: Não houve correlação entre o IMC e o desenvolvimento dentário para a amostra estudada (AU)

Abstract Objective: To evaluate the correlation between the Body Mass Index (BMI) and dental development in patients with Class II malocclusion. Materials and Methods: This was a retrospective study with a sample of 37 patients presenting Class II malocclusion, who were undergoing orthodontic treatment. The age, gender, weight and height data were collected from the medical records, together with the initial CT scan. Dental development was assessed using the method of Demirjian et al. (1973). Pearson's correlation coefficient was used to determine the correlation strength between variables. The statistical significance considered was p <0.05 two-tailed. Results: The sample consisted of patients between 10 and 16 years old. The majority of the patients (78.4%) had a normal BMI. There was a weak correlation without statistical significance between tooth development and BMI in the evaluated patients (r=-0.10; p=0.55). Conclusion: There was no correlation between BMI and dental development for the sample studied.(AU)

Tratamento da Classe II com Invisalign / Treatment of Class II malocclusion with Invisalign

Resumo Corrigir totalmente a má oclusão de Classe II, em um paciente adulto, não é uma tarefa fácil. Em um caso com grande discrepância esquelética, a cirurgia ortognática é o tratamento de escolha. No entanto, se a discrepância for pequena ou se for um caso limítrofe, outras opções de tratamento estão disponíveis como as extrações e os mini-implantes. Casos intermediários também podem ser tratados com propulsores mandibulares e elásticos de Classe II. Este relato clínico apresenta o tratamento ortodôntico de uma paciente de 25 anos com má oclusão de Classe II. Clinicamente, a maxila estava bem posicionada e a mandíbula estava levemente retruída. Apresentava os incisivos superiores vestibularizados, os incisivos inferiores bem posicionados e optou por um aparelho ortodôntico mais esteticamente atraente. O plano de tratamento incluiu nivelamento e alinhamento dos dentes em ambas as arcadas, correção da Classe II, estabelecimento de relações molar e canino de Classe I, correção dos trepasses horizontal e vertical, ajuste das linhas médias e melhora da estética facial e dentária. O tratamento ortodôntico consistiu de alinhadores removíveis Invisalign e elásticos de Classe II. (AU)

Abstract Complete correction of Class II malocclusion in an adult patient is not an easy task. In a case with large skeletal discrepancy, orthognathic surgery is the treatment of choice. However, in case of slight or borderline discrepancy, other treatment options are available, such as tooth extractions and miniscrews. Intermediate cases can also be treated with Class II correctors and elastics. This clinical report presents the orthodontic treatment of a 25-year-old female patient with Class II malocclusion. Clinically, the maxilla was well positioned, and the mandible was slightly retruded. The patient presented vestibularized upper incisors, well- positioned lower incisors and opted for a more aesthetically attractive orthodontic appliance. The treatment plan included teeth leveling and aligning in both arches, Class II correction, establishment of Class I molar and canine relationships, correction of overjet and overbite, midline correction, and improvement of facial and dental aesthetics. The orthodontic treatment consisted of removable Invisalign aligners and Class II elastics. (AU)

Esthetic perception of facial profile changes in Class II patients treated with Herbst or Forsus appliances.

OBJECTIVE: To evaluate the esthetic perceptions of orthodontists and laypersons for facial profile changes after orthodontic treatment using Herbst or Forsus appliances. MATERIALS AND METHODS: Pre- and posttreatment facial profile contour images of 20 Class II patients treated with Herbst (group H; n = 10) and Forsus (group F; n = 10) appliances were analyzed by 30 orthodontists and 30 laypersons, who graded them from 1 (unattractive) to 10 (very attractive) using a visual analog scale. Two assessments were carried out with a 15 day-interval. In the first evaluation, 40 images were presented in a random sequence. In the second evaluation, initial and final facial profile images of each patient were randomly presented side by side. To compare groups in relation to treatment method, Mann-Whitney tests were used. To evaluate differences between time points, Wilcoxon tests were used. RESULTS: In the first evaluation, there was a significant difference between initial and final images only for group H, for both laypersons (P = .017) and orthodontists (P = .037). There was also a significant difference between laypersons and orthodontists in their ratings of posttreatment Herbst appliance profiles (P = .028). There was no significant difference between initial and final facial profile images for group F and no significant differences between or within evaluator groups in their ratings of initial or final Forsus appliance profiles. In the second evaluation, there was a significant difference between appliance groups only for laypersons, who considered cases treated with the Herbst appliance more attractive than those treated with the Forsus (P = .031). Laypersons also considered Herbst profiles more attractive than did orthodontists (P = .047). CONCLUSIONS: Class II malocclusion treatment using the Herbst appliance may produce a more esthetically improved facial profile silhouette compared with Forsus appliances. The magnitude of perceived changes may not be considered clinically relevant.